SEKRI UNTUK SETING ROUTER
Press RETURN to get started!
Router>enable
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#host UWEN1
UWEN1(config)#int fa0/0
UWEN1(config-if)#ip add 192.168.2.1 255.255.255.0
UWEN1(config-if)#no shut
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
UWEN1(config-if)#ex
UWEN1(config)#int fa1/0
UWEN1(config-if)#ip add 192.168.1.2 255.255.255.0
UWEN1(config-if)#no shut
%LINK-5-CHANGED: Interface FastEthernet1/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet1/0, changed state to up
UWEN1(config-if)#ex
UWEN1(config)#router rip
UWEN1(config-router)#network 192.168.2.0
UWEN1(config-router)#network 192.168.1.0
UWEN1(config-router)#ex
UWEN1(config)#ex
%SYS-5-CONFIG_I: Configured from console by console
UWEN1#sho ip route
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
* - candidate default, U - per-user static route, o - ODR
P - periodic downloaded static route
Gateway of last resort is not set
R 192.168.0.0/24 [120/1] via 192.168.1.1, 00:00:01, FastEthernet1/0
C 192.168.1.0/24 is directly connected, FastEthernet1/0
C 192.168.2.0/24 is directly connected, FastEthernet0/0
UWEN1#
Sekrip di atas di ketik di CLI yang ada di Packet Tracer 4.01
ke masing masing router.
dan sring IP di komputer dengan mengguanakan Gateway yang ada di IP LAN yang kita seting.
...... bersambung
Arsip Blog
Kamis, 06 September 2007
KONFIGURASI ROUTER BAGIAN 1
Diposting oleh uwen di Kamis, September 06, 2007
Langganan:
Posting Komentar (Atom)
Tidak ada komentar:
Posting Komentar